JEACENT Portable Air Conditioner Sliding Door AC Vent Kit, Universal Adjustable PVC Balcony Seal Kit Plates Up to 90 Inches, For 5.1″ and 5.9″ Diameter Portable AC Exhaust Hose

It works as advertised and it’s good quality
We’ve had eight portable air conditioners. So, we are very familiar with the installation process. This time we wanted to use our sliding glass door instead of a window in the living room. This works for us with no problem. However, you can only have the air duct exit at the bottom of the door/adapter. Another words, you cannot have the air duct exit at the same level as the air conditioner hose. It would be more efficient if the vent did not have to go down to reach the exit hole at the bottom. The design and quality are much better than any we’ve ever had that were provided with the unit at the time of purchase, including the very expensive units. They only provide one extra bolt and wingnut, and that was barely enough because one of them was defective and another one was less than perfect but we were able to use it. The other thing you should consider is once you install. The stick on insulation strips, you would have to cut them to take it apart so it would be better to leave it put together when you’re not using it. Also sliding apart. The individual pieces was very difficult. Even my husband had a really hard time. Nonetheless, I would highly recommend the adapter kit and I think it’s a very good and fair price.

It fits my sliding glass door.
I can only use my portable A/C unit (Midea MPF14CR81-E / 14K BTU / 8400 BTU SACC ) with my sliding glass door. This kit did NOT accommodate 6″ exhaust hose my unit came with but luckily my unit came with a smaller window kit. The pieces were interchangeable so I was able to substitute the panel with the opening that came with my unit. I had to drill a hole in it to fit the screws in but it worked out fine. The hardest part is getting trying to eliminate the gaps between the door frame and the door / door panels. My door doesn’t hang perfectly straight and with so many panels there it doesn’t really stay flat. I used a ton of foam tape and even that didn’t work. I ended up using some of that clear silicone tape (that is used to hang pictures on walls with out adhesive or nails) to seal the gaps between the panels and the door and the panels and the jam. Seals strong and worked well. Putting the panels together wasn’t too hard, just getting it installed took some time due to the gaps. Overall, it was worth the money to be able to run my A/C efficiently. The pieces are very sturdy and not flimsy. I am leaving it attached to my door and unsealing the jam part so I can open the door and go on my deck when necessary. The silicone tape is a little tricky to work but you can use hair dryer or heat tool to make it more pliable.

Best of Three
I’ve had 3 different kits for sliding doors over the past few years and this is the best one yet.Very sturdy plastic, fits my my 5.9″ hose, universal threading for attachment, shipped quickly in a compact box with all items efficiently packed.I’m glad I didn’t let the reviews that mention drilling scare me away. You do NOT need to drill holes. The flat oval end of the bolt fits perfectly in the track slot when you insert the hardware correctly.I would repurchase this item and recommend it.

Works Perfectly
Works perfectly with my sliding glass door. Plenty of materials to cover the gap. I was concerned about that since my door is very tall, but I had just enough pieces. Buy extra foam to fill in gaps. Its thick and makes me feel secure.

The slats are perfect for my large sliding door. They were pretty easy to put together. We did have to use the bottom slat from the original kit to fit the hose in. The attachment in this kit didn’t quite fit the hose.

I ordered this item over a month ago and it didn’t fit my window nor does it come with a hose. I’ve contacted the seller weeks ago and no response regarding a refund. I paid $65 Canadian and I need my money back because it doesn’t fit my window nor has all the parts shown in the pictures. Do not buy.

Mi aire portátil es de la marca DeLongi el tubo de ventilación es un poco mas grande que el adaptador Jeacent para colocarlo en la ventana y tiene 3 pestañas la cabeza del tubo o manguera y el de Jeacent kit tiene cuatro por lo que no se puede ajustar lo que opte por colocarle cinta aisladora de ductos de ventilación una que es de color plateado al adaptador de Jeacent para usar todo el kit; mención a parte el kit se ajusta bien a la ventana tiene unas aristas que ayuda a permanecer en su lugar, es resistente y no se mueve al abrir la puerta ya que se genera una bolsa de aire que hacia que se desajustara el kit que trae la marca de mi aire.